[FLY-BX-5A] Cup-shaped without valve mask 丰绿源杯状无阀口罩

中文

Cup-shaped without valve mask

[Model] FLY-BX-5A
[Class]: FFP3 NR
[Packing Specifications]:15PCS/Box
[Size] 15.3cm * 14cm * 6cm
[Compliant to EN Standards]: EN 149:2001+A1:2009

EU DECLARATION OF CONFORMITY

DETAIL

【Indications For Use】The protective mask is intended used for protection against solid and oily particulates, liquid and microorganisms such as coal dust, cement dust, acid fog, paint fog, oil smoke, oil mist, asphalt smoke, coke oven smoke etc. Single-use.
【Limitations】Not suitable for working places where open flames exist (such as welding,casting,etc,); It is not suitable for professional protective use such as oxygen deficient, toxic gas environment. No medical use.
【Checks prior to use】Please check whether the packaging is damaged, whether the mask body is damaged, deformed or has other obvious defects before use.
【Transporting】When transporting this product use original packaging provided.
【USE CAUTIONS】 a）Please check fit of mask prior to use;
b）It is unlikely that the requirements for leakage will be achieved if facial hair passes under the face seal；
c）Please do not use the mask under low air quality condition, such as serious contaminants in air, oxygen deficiency;
d）Do not use the mask in explosive atmosphere;
e）After use, please discard the mask following local regulation;
f）The mask is only for single use, do not use repeatedly.
g) DO not use the same respirator for more than 8 hours continuous or intermittent, in dirty workplaces that could result in high filter loading.
h) The maximum service time of this respirator is five(5) consecutive calendar days(including days of non-use),beginning from the first day of use.
See information supplied by the manufacturer.

Fitting

STEP 1. Hold the respirator in hand with the nosepiece at your fingertips,allowing the headbands to hang freely below your hand.
STEP 2. Press the respirator firmly against your face with the nosepiece on the bridge of your nose.
STEP 3. Stretch and position the top band high on the back of the head.Stretch the bottom band over the head and position below your ears.
STEP 4. Using both hands,mold nosepiece to the shape of your nose .
STEP 5.TO test fit:a)Cuo both hands over the respirator being careful not to distrub position,and b) inhale vigorously.if air leaks around the edges, reposition the straps or adjust strap tension for better fit.
Please carefully follow these fitting instructions during each use to achieve proper fit. Storage Condition: : The product should be stored in a well ventilated, dark and dry environment. Keep away from fire, pollutants and possible pollution sources. Also, the transport storage ‘s temperature: -5℃~50℃, relative humidity: < 75%RH.
CompleteShelf-Life: The Protective Mask is valid for 3 years with the above storage condition.
Production Batch Number: Printed on the bottom
Production Date: Printer on the bottom
Expiration Date: Printer on the bottom
Manufacturer: Guangdong Fengluyuan Biopharmaceutical Technology CO., LTD
Complete Address: Buildjing 2nd, Guantai Biotechnology Cooperation And Breeding Center 1# Taoyuan Road, Taiwan Hi-tech Park, Songshan Lake, Dongguan Guangdong China.
Phone: 0769—22426953

Cert & report

TEST REPORT OF CUP FFP3 PROTECTIVE MASK

RETURN

English

杯状无阀口罩

[型号] FLY-BX-5A
[类别]：FFP3 NR
[包装规格]：15片/盒
[尺寸] 15.3cm * 14cm * 6cm
[符合EN标准]：EN 149：2001 + A1：2009

EU DECLARATION OF CONFORMITY

详情

【使用指征】 防护面罩用于防止固体和油性颗粒，液体和微生物，例如煤尘，水泥尘，酸雾，油漆雾，油烟，油雾，沥青烟，焦炉烟等。一次性使用。
【限制条件】 不适合存在明火的工作场所（如焊接，铸造等）；它不适用于专业防护用途，例如氧气不足，有毒气体环境。无医疗用途。
【使用前检查】 使用前，请检查包装是否损坏，口罩主体是否损坏，变形或有其他明显缺陷。
【运输方式】 运输本产品时，请使用提供的原始包装。
【使用注意事项】 a）使用前请检查口罩是否合适；
b）如果面部毛发穿过面部密封处，则不可能达到泄漏要求；
c）请不要在空气质量低的环境下使用口罩，例如空气中的严重污染物，氧气不足；
d）请勿在易爆环境中使用口罩；
e）使用后，请按照当地规定丢弃口罩；
f）口罩仅供一次性使用，请勿重复使用。
g）在肮脏的工作场所中，连续或间歇使用同一台防毒面具的时间不得超过8小时，否则可能会导致过滤器负荷过高。
h）从使用第一天开始，此呼吸器的最长服务时间为连续五（5）个日历日（包括不使用的天数）。
请参阅制造商提供的信息。

适用场景

步骤1.用手握住呼吸器，使鼻子保持在您的指尖，使头带自由悬挂在手下方。
步骤2.用鼻托将呼吸器紧贴在您的脸上，并将其放在鼻梁上。
步骤3.拉伸并将顶部绑带放在头后部的高处。将底部绑带拉到头顶上，并放在耳朵下方。
步骤4.用双手将鼻梁模制成鼻子的形状。
步骤5.要进行测试是否合适：a）双手捂住呼吸器，注意不要扰乱其位置； b）大力吸气。如果边缘漏气，请重新调整皮带的位置或调整皮带的张力，以使其更舒适。
每次使用时，请仔细遵循这些安装说明，以实现正确的安装。储存条件：该产品应储存在通风良好，黑暗干燥的环境中。远离火源，污染物和可能的污染源。另外，运输仓库的温度：-5℃〜50℃，相对湿度：< 75％RH。
有效期：在上述储存条件下，口罩的有效期为3年。
生产批号：在底部印刷
生产日期：见底部
到期时间：见底部
印刷制造商：广东丰绿源生物制药技术有限公司
完整地址：中国广东省东莞市松山湖台湾高科技园区桃园路1号莞台生物科技合作育成中心2号楼。
电话：0769—22426953